Information Center
Categorize
Company News
Industry News

Company News

What are the precautions for using black zinc sealant?

What are the precautions for using black zinc sealant?

Feb 11,2026

When using black zinc sealant, it is essential to strictly control process parameters and operating procedures to ensure a uniform coating appearance, consistent blackness, and stable corrosion resistance, while also maintaining production safety. Workpiece Pre‑treatment: The workpiece must first undergo galvanizing, degreasing, descaling, activation, and black passivation, with a clean surface free of oil, water stains, and adhering dust. After passivation, thoroughly rinse with clean water to prevent residual acid or alkaline solutions from entering the sealing bath, which could cause the sealing solution to age and develop blackening or mottling. Bath Solution Control: Prepare the bath solution according to the manufacturer’s specified concentration; do not arbitrarily increase or decrease the concentration. Maintain proper temperature, time, and agitation/spraying conditions—excessively high temperatures can lead to peeling or bluing, while too low temperatures result in insufficient blackness and poor corrosion resistance. Regularly monitor bath parameters and replenish the sealant as needed. Operating Procedures: During immersion, spraying, or ultrasonic sealing, ensure complete wetting of the workpiece surface, with no air bubbles trapped in crevices or holes. After removal, allow excess bath solution to drain off to avoid streaks or water marks. Curing temperature and time must meet specifications to ensure a dense, well‑adhered film. Post‑treatment Requirements: Following sealing, perform drying and curing according to the prescribed process; avoid natural air drying, as this may cause mottling, dust adhesion, or reduced corrosion resistance. After drying, cool the parts to room temperature before packaging and stacking to prevent scratching or sticking. Safety and Storage: Most sealants are chemical products; wear acid‑ and alkali‑resistant gloves and eye protection during handling to avoid skin and eye contact. Do not allow the bath solution to come into contact with other chemicals. Store the product sealed in a cool, well‑ventilated area, away from sources of ignition, high temperatures, and strong acids or bases, to prevent degradation or potential safety hazards.

MORE
Application areas of black zinc sealant

Application areas of black zinc sealant

Feb 11,2026

Black zinc sealants are primarily used for black passivation and sealing of electroplated zinc, Dacromet, and other coating systems, significantly enhancing corrosion resistance, wear resistance, and surface aesthetics. They are widely employed in industries such as hardware, machinery, and electronics, where both corrosion protection and visual appeal are critical. In the automotive and construction machinery sectors, black zinc sealing is one of the core application areas. Components like vehicle frames, chassis fasteners, engine parts, transmission components, bearing housings, and hydraulic elements exhibit markedly improved salt‑spray resistance after black zinc sealing, while maintaining a sophisticated, low‑key black finish that is both durable and resistant to abrasion—meeting stringent requirements for long‑term outdoor use, corrosion protection, and aging resistance. In the electronics, electrical appliances, and telecommunications industries, black zinc sealants are commonly applied to enclosures, connectors, brackets, heat‑dissipating components, sensor housings, and similar parts. They deliver a uniform, matte black appearance while providing excellent insulating properties, thus addressing the dual needs of electronic devices for rust prevention, antistatic performance, and aesthetic appeal. In the hardware, building materials, and security sectors—such as door locks, hinges, slides, fasteners, and decorative hardware—black zinc sealing imparts a high‑end, matte black finish, elevating product sophistication while resisting the corrosive effects of humid, acidic, or alkaline environments and extending service life. Furthermore, black zinc sealants are extensively utilized in instrumentation, furniture hardware, outdoor equipment, and other fields. Combining corrosion protection, decorative enhancement, and wear resistance, they serve as an indispensable post‑treatment material for black‑zinc‑plated components, particularly well suited to high‑end manufacturing applications that demand both superior corrosion resistance and consistent aesthetic quality.

MORE
What is the method of using the degreasing and dust-removal cleaning agent?

What is the method of using the degreasing and dust-removal cleaning agent?

Feb 11,2026

Oil‑removal and ash‑cleaning agents are typically applied using one of three methods: immersion, spray rinsing, or ultrasonic cleaning. The operational steps are as follows: Dilution: Prepare the solution according to the product instructions by mixing the cleaner with water at the recommended ratio; a typical concentration is 5%–10%. Stir thoroughly, then pour the solution into the cleaning tank. Temperature Control: Room temperature is acceptable, but heating to 40–60°C yields better results and significantly accelerates oil and ash removal. Cleaning Methods: Immersion Cleaning: Fully submerge the workpiece, agitate or turn it over, and allow it to soak for 3–10 minutes. Ultrasonic Cleaning: Use ultrasonic waves; complex cavities and tight crevices can be cleaned in just 2–5 minutes. Spray Rinsing: Suitable for production lines, apply at a pressure of 0.2–0.4 MPa for 1–3 minutes. Post‑Treatment: After all oil and ash residues have been removed, take out the workpiece, rinse thoroughly with clean water, and then dry it by baking or air‑drying to prevent watermarks and re‑rusting. Maintenance: When the cleaning solution becomes contaminated, replenish it with fresh cleaner or replace it entirely to ensure consistent cleaning performance.

MORE
Composition and Principle of Metal Degreasing and De‑ashing Cleaning Agents

Composition and Principle of Metal Degreasing and De‑ashing Cleaning Agents

Feb 11,2026

Metal degreasing and descaling cleaning agents are primarily composed of surfactants, alkaline auxiliaries, chelating agents, corrosion inhibitors, solvents, and auxiliary additives. Through synergistic physicochemical action, they rapidly remove oil contamination, oxide scale, rust, and metal powders. Core Components Surfactants: A blend of nonionic and anionic surfactants reduces surface tension, enabling emulsification, dispersion, and enhanced solubilization of oily soils. Alkaline Auxiliaries: Such as sodium hydroxide, sodium carbonate, and silicates, which saponify animal and vegetable oils, thereby enhancing cleaning performance. Chelating Agents: Including EDTA, sodium gluconate, and phosphates, these complex with calcium and magnesium ions as well as other metal ions in water, preventing redeposition of scale. Corrosion Inhibitors: Comprising silicon-based compounds, amines, and organic heterocyclic substances, they protect substrates such as steel, aluminum, and zinc from corrosion. Solvents and Detergents: Organic solvents and penetrating agents facilitate rapid penetration and removal of stubborn heavy oils and carbonized residues. Cleaning Mechanism: The formulation leverages multiple actions—saponification, emulsification, dispersion, penetration, and chelation. Alkaline components saponify fats and oils, while surfactants emulsify and disperse non‑saponifiable mineral oils. Penetrants infiltrate the interface between oil contaminants and the substrate, reducing adhesion. Chelating agents sequester metal and hardness ions, preventing re‑rusting and re‑soiling. Under spray, immersion, or ultrasonic treatment, contaminants are swiftly detached and suspended in the cleaning solution, achieving integrated degreasing, descaling, and derusting effects. The formulation can be tailored to specific substrates—such as steel, aluminum, zinc, or copper—ensuring efficient cleaning without damaging the material.

MORE
What are the types of electro-galvanizing additives?

What are the types of electro-galvanizing additives?

Feb 11,2026

Electroplating zinc additives are essential auxiliaries for controlling coating quality. Based on their functions, they are primarily categorized into six types: brighteners, carriers, levelers, complexing agents, wetting agents, and impurity‑removing agents, and are compatible with various plating bath systems, including acidic and alkaline formulations. Major Types and Functions Brighteners: Classified as primary and secondary brighteners. Primary brighteners—such as benzylidene acetone in acidic baths or polyamines in alkaline baths—refine grain size and enhance the brightness of the coating. Secondary brighteners also provide leveling effects, improving the smoothness and uniformity of the deposit. Carriers: Typically nonionic surfactants (e.g., polyether compounds), which solubilize brighteners, improve dispersion, stabilize the plating bath, and enhance throwing power. Levelers: Preferentially adsorb at high‑current regions, suppress excessively rapid local deposition, fill microscopic pits, and promote a uniform, dense coating. Complexing Agents: In alkaline systems, hydroxides and cyanides are commonly used to form complexes with zinc ions, increasing cathodic polarization, stabilizing the bath, and improving deep‑plating capability. Wetting Agents: Reduce interfacial tension, minimize pinholes and pitting defects, and enhance coating adhesion. Impurity‑Removing Agents: Eliminate metallic impurities such as copper and iron, preventing roughness and dullness caused by contamination. Additive formulations vary significantly across different plating systems; acidic zinc plating emphasizes brightness and leveling, while alkaline zinc plating prioritizes complexation and uniform distribution. Selection and combination should be tailored to the specific process requirements.

MORE
Deep holes, high temperatures, and corrosion resistance? This water-soluble chloride-based zinc plating additive handles it all.

Deep holes, high temperatures, and corrosion resistance? This water-soluble chloride-based zinc plating additive handles it all.

Feb 11,2026

HL-613 water-soluble chloride-based zinc plating additive, with its outstanding deep‑plating capability, high‑temperature stability, excellent corrosion resistance, and broad substrate compatibility, is widely used across multiple industries that demand superior plating quality, production reliability, and environmental compliance. It is particularly well suited for complex‑shaped parts and applications requiring high‑end protective coatings.

MORE
< 12 > proceed page

Leading the innovative development of environmentally friendly electroplating chemicals!

Send
%{tishi_zhanwei}%
Guangdong Haolun Environmental Protection Technology Co., Ltd.

Guangdong Haolun

Contact number: +8619068760526

Email: 157297631@qq.com

Address: 360 meters northwest of the intersection of Xiaocui Road and Huanshi North Road, Rongcheng District, Jieyang City, Guangdong Province, CaiRun Building, Guangdong Haolun Environmental Protection Technology Co., Ltd.

Home
About Us
Product
Applications
Blog
Contact Us

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

License

Powered by 300.cn     | SEO  | Privacy Policy